About ISO 26262
ISO 26262 (“Road vehicles –Functional safety”) is the current ISO standard for safety relevant electronic and electric (E/E) systems in passenger cars up to 3.5 tons. In the past the standard for electronic and programable devices for functional safety was IEC 61508. Based on this standard the ISO 26262 expanded the requirements for nowadays electronic vehicle architecture and safety.
The innovation and optimization of electrical / electronic vehicle architecture increased rapidly in the last 30 Years, due to this fact it is important to guarantee the functional safety of the parts and systems in production.
The ISO 26262 focusses on all aspects of functional safety including hardware and software. The certification for ISO 26262 is on process, product and tools.
Which parts of vehicle does 26262 affect?
Electrical/Electronic (E/E) “that provides safety or safety-related functions”
- Anti-lock brakes, air bags, traction control, electronic cruise control, adaptive cruise control, collision avoidance, lane change control
Less obvious examples:
- Front windshield defroster/defogger, rear windshield (backlite) defroster, auto-on headlamps, auto-on running lights, seat-belt pre-tensioners, low tire pressure warning system, engine, electric-assist power steering.
Why do I need ISO 26262 and what is my added value?
The Goal of ISO 26262 is to provide an automotive safety lifecycle. From its management to development further to production, operation and service. It can be used to tailor necessary activities during these lifecycle phases. For example, if an automobile manufacturer or supplier wants to develop a safety-related system.
For ISO 26262 compliance; a functional safety consultant identifies and assesses hazards (safety risks). These hazards are then categorized based on their criticality factor under the Automotive Safety Integrity Level (ASIL) under ISO 26262. Such a clear classification of hazards helps to :
- Establish various safety requirements to mitigate the risks to acceptable levels
- Smoothly manage and track these safety requirements
- Ensure that standardized safety procedures have been followed in the delivered product.
Because all Automotive System development for Electronic and Electrical components need to comply to ISO 26262 a supplier must be certificated to work with this standard so that he stays competitive and able to provide the automobile manufactories.
The ISO 26262 consists of 10 parts
What are the key Concepts for Compliance with ISO 26262?
- Proper requirements management, design, and quality management practices
- Across all assets and work products, originated from requirements
- Change and Configuration Management
- Process Improvement
- Collecting process information
- Collecting operational information
- Accountability and progress reporting
- Audit trail
- Work products
- Audit trail
Traceability is the key to compliance with ISO 26262.
Initial requirements will be decomposed, which creates traceability relationships. Other relationships can also be traced such as “consists of”, “verifies”, etc.
Traceability must be enforced in order to ensure consistency and completeness
Traceability from customer requirements through product development to test and delivery enables organizations to:
Know which requirements are implemented and tested vs. those which are not Manage and defend against scope creep
What can IBM and Softacus do for you?
With IBM Tools you can easily become ISO 26262 certified. Due to the Jazz Platform which combines several possibilities to track your progress and to safe your maturity level.
The IBM Rational Solution for Automotive Engineering - ISO-26262 is a set of best practices to help organizations develop products that must comply with the ISO-26262 functional safety standard. The scope of these practices covers areas that are described by ISO-26262, relating to management of functional safety, concept, system engineering, and software development. They have been developed to support the incremental adoption of process, practices and tools, thereby reducing the time to value for process improvement initiatives. More information.
How the elements of the IBM platform relate to ISO 26262:
- Requirements (DOORS Next/DOORS)
- Drive activities as well as support traceability and verification
- Systems Modelling, Simulation, and Software Auto-Code Generation (Systems Design Rhapsody)
- SysML modelling provides ability to architect overall system –mechanical and E/E and then to execute to verify model
- Links to 3rdparty tools, Simulink, Modelica, Mentor Graphics
- Configuration and Change Management (Engineering Workflow Management)
- Configuration management of E/E In development (baseline and other revisions), as well as configuration management for different option combinations
- Change Management for control of ECRs to E/E
- Process (Engineering Workflow Management and ELO -Method Composer)
- 26262 is very process based
- Non-prescriptive: “what to do”
- “How to do” mainly focussed on detailed safety anaylsis,
- Practice libraries for how to do many tasks for Rational and 3rd party tooling to comply with ASPICE and ISO 26262
- Requirements Change Request Process
- OEM/Supplier exchange via ReqIF
- Version management of requirements
–True Requirements Reuse
- Traceability across
–Requirements, Models, Code and Test
Requirements managed as part of a global configuration ISO 26262:
-Use a proper requirements management tool
How does the IBM ELM platform facilitate ISO 26262 compliance?
- Verification and verification planning (Test Conductor and Engineering Test Management)
- Lot of emphasis on validation and verification of Systems, HW and SW
- Level and type of test dependent upon ASIL of element to be developed.
- Integrations with National Instruments Veristand
- ISO 26262 RQM process template
- Work going on with ETAS on HW-SW integration with EWM
- Production and Operation
- New technology in the form of Internet of Things
- Big Data and Analystics
- Turning Data into Information (Jazz and ELO –Engineering Insights)
- Collaborative environment and team working
- Potentially across OEM-Supplier boundaries
- View information existing in different tools via OSLC integrations
- Mentor Graphics
- National Instruments
- Simulink etc
- Customise views on that information
See the videos below for further information
Softacus can show you first-hand how the products are used in practice and work out a solution that is best suited for you and your company according to your needs.
Our presentation is special suited to the needs of our customers. We want you to ask us as many questions as you want so that you can convince yourself.
Feel free to Contact us for additional information